The WU11 is to connect the SA11 to the FLXA402, UM33A-S, SMARTDAC+ or any other HOST system.
WU11-…-V: for FU20F, FU24F, SC25F, and IB100
WU11-…-S: for SA11, BA11, IB100, and –VS sensors
Related Products & Solutions
-
Digital SMART SENCOM™ Adapter, SA11
Reusable SMART adapter, requiring only the analog sensor to be disposed of when it reaches the end of its lifetime. With the SENCOM 4.0 platform, Yokogawa delivers reduced costs and waste while contributing to its long-term business goals of a sustainable future for all.
-
Digital SMART SENCOM™ Sensor Interface Box, IB100
By using SMART sensors, calibration data is stored within the sensor’s memory chip. Calibration data can be downloaded or uploaded to and from the SENCOM™ sensor and received HMI. The software allows the operator to monitor pH/ORP sensor performance, calibrate and configure various parameters.
-
UM33A-S SENCOM HMI Type
The UM33A-S connects to sensors which are connected to a digital SENCOM Smart Adapter, model SA11. The main functions of the UM33A-S are displaying the measured values of the sensor and calibrating the sensor.